Carleader Launches Waterproof Side View Camera for Commercial Vehicles with Day Night Vision to Improve Truck Blind Spot Visibility

Carleader Expands Commercial Vehicle Camera Solutions with a New Side-View Design. Side visibility is becoming an increasingly important part of modern vehicle monitoring. Large trucks, buses, logistics vehicles and delivery vans have extensive areas alongside the vehicle that may be difficult for drivers to observe directly, especially during turning, lane changes, reversing and low-speed maneuvering.

To address this requirement, Carleader has developed the Waterproof Side View Camera for Commercial Vehicles with Day Night Vision. The new vehicle side camera is designed to provide an additional camera angle alongside the vehicle, helping drivers and fleet operators obtain more visual information around areas that conventional rear-view systems may not fully cover. Rather than replacing a complete vehicle camera system, the commercial vehicle side camera can work as an additional monitoring channel together with front-view and rear-view cameras.

Why Side Visibility Matters for Trucks and Commercial Vehicles

For a passenger car, the area beside the vehicle may be relatively easy to observe through conventional mirrors. However, the situation can be different for a heavy truck, bus, van or other large commercial vehicle. The longer body, larger turning radius and different driving position can create areas where direct observation is more difficult. This is where a truck side camera can become useful. A dedicated side view camera for trucks can be mounted toward the left or right side of the vehicle and connected to an in-cab monitor. It provides an additional visual reference for areas beside the vehicle and can therefore be used as part of a truck blind spot camera system or broader commercial vehicle surveillance solution. The CL-819 provides a 140° viewing angle, giving the side-facing camera a broad coverage area for vehicle-side monitoring.

140° Wide-Angle Coverage for Side-Area Monitoring

The most important optical feature of this wide angle side camera is its 140° viewing angle. Combined with a 2.0mm lens, the camera is designed to capture a broad area beside the vehicle rather than focusing only on a narrow section.

This makes the camera suitable for applications such as:

• Truck side monitoring
• Van side-view camera systems
• Bus side monitoring
• Commercial vehicle blind spot monitoring
• Delivery vehicle surveillance
• Logistics truck monitoring
• Construction vehicle monitoring
• Multi-camera vehicle safety systems

For vehicle manufacturers and fleet integrators, a 140° side camera can therefore serve as a flexible additional camera position within a larger vehicle monitoring architecture.

One Camera Platform for Left-Side and Right-Side Installation

Commercial vehicles may require different camera orientations depending on the installation position. A camera installed on the driver's side does not necessarily require the same image orientation as a camera installed on the opposite side. For this reason, the CL-819 supports both mirror image and non-mirrored image configurations. This allows the same vehicle side camera platform to be adapted to different installation positions without requiring completely different camera designs. For distributors and vehicle camera installers, this can simplify product selection when developing left-side camera, right-side camera, truck wing camera or commercial vehicle side monitoring projects.

Day and Night Monitoring Without Manual Switching

Side monitoring does not stop when daylight disappears. Commercial trucks may operate early in the morning, at night, inside poorly illuminated yards, underground loading areas or other low-light environments. A side camera therefore needs to maintain useful visibility under changing lighting conditions. The CL-819 uses an automatic IR-Cut day and night switching function. According to the ambient lighting conditions, the camera automatically changes between its day and night operating modes. In addition, 5 LEDs provide illumination support in low-light conditions, with a minimum illumination specification of 0.5 LUX. This combination makes the product more than a standard daytime truck side view camera. It can also be integrated into commercial vehicle monitoring systems that require day/night operation.

CVBS, AHD720P and AHD1080P: Flexible Video Integration

Different commercial vehicle projects may already use different camera and monitor technologies. Some fleets continue to use CVBS systems, while newer vehicle camera projects may use AHD high-definition video. Instead of limiting system integrators to one video format, the Waterproof Side View Camera is available with:CVBS / AHD720P / AHD1080P. This gives vehicle camera distributors and system integrators greater flexibility when matching the side camera with an existing vehicle monitor, DVR, MDVR or multi-camera display system. For example, an integrator can combine a truck side camera with a rear view camera and front camera to create a multi-angle commercial vehicle monitoring system.

IP69K Protection for Exterior Vehicle Camera Installation

A side-mounted camera is exposed to conditions that an interior vehicle camera does not normally encounter. Rain, road splash, dust, mud, vehicle washing and outdoor operating environments can all affect exterior camera equipment. The CL-819 uses an IP69K-rated housing, making it suitable for demanding exterior vehicle camera applications. This makes the IP69K side view camera suitable for commercial vehicles that operate in transportation, logistics, construction, delivery and other outdoor environments. The camera supports a standard DC12V power supply, with 24V available as an option, allowing it to be considered for both conventional automotive systems and higher-voltage commercial vehicle platforms.

More Than a Blind Spot Camera: Building a Complete Vehicle View

The CL-819 does not need to be used as a standalone product.

• For a larger truck, a more comprehensive camera configuration can combine: Front View Camera + Side View Camera + Rear View Camera

For example, side cameras can monitor the areas alongside the vehicle, while a rear view camera provides visibility behind the vehicle.

• For buses, delivery trucks and logistics vehicles, multiple commercial vehicle cameras can be connected to a compatible monitor or DVR to create a broader vehicle surveillance system.

This approach can be particularly useful for fleet monitoring, where operators may want a standardized camera configuration across different vehicle types.

Optional Audio for Specialized Monitoring Projects

For projects where visual monitoring needs to be supplemented with audio, the CL-819 also supports an optional built-in microphone. This gives system integrators another configuration option when developing specialized commercial vehicle surveillance camera systems. The microphone is optional rather than standard, allowing buyers to select the configuration according to their actual project requirements.

FAQ: Waterproof Side View Camera for Commercial Vehicles

1. What is a side view camera used for?

 A side view camera provides an additional viewing angle alongside a vehicle and can help monitor areas that are difficult to observe directly, making it useful for truck blind spot monitoring and commercial   vehicle surveillance.

2. Is this side camera suitable for trucks?

 Yes. The CL-819 is designed for commercial vehicle applications and can be used on trucks, vans, buses, delivery vehicles, logistics vehicles and other vehicle types.

3. Does the truck side camera support night vision?

 Yes. It uses an automatic IR-Cut day/night switching system and 5 LEDs for low-light illumination.

4. What is the viewing angle?

 The wide-angle side camera provides a 140° viewing angle.

5. Can it be installed on either side of a vehicle?

 Yes. Mirror and non-mirrored image options are available for different left-side and right-side installation requirements.

6. Does it support 1080P?

 Yes. An AHD1080P version is available, together with CVBS and AHD720P options.

Carleader: Commercial Vehicle Camera Manufacturer and Supplier

With the increasing use of camera-based monitoring in commercial transportation, a single rear-view camera is often not enough for vehicles that require wider visual coverage. The Waterproof Side View Camera for Commercial Vehicles with Day Night Vision provides system integrators with another building block for developing truck camera systems, commercial vehicle blind spot monitoring systems, fleet camera solutions and multi-camera vehicle surveillance systems. With 140° wide-angle coverage, automatic day/night switching, CVBS/AHD compatibility, mirror/non-mirrored options and IP69K protection, the CL-819 is designed as a flexible vehicle side camera platform for different commercial vehicle projects. For distributors, fleet solution providers, vehicle manufacturers and aftermarket installers looking for a truck side camera supplier, commercial vehicle camera manufacturer or waterproof vehicle camera factory, Carleader provides configurable camera solutions for different vehicle monitoring requirements.